State of the Art CNC Machining Facility – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 1 closing every minute in numerical order.

For Example: Lot 1 will start to close at 10:00 AM, Lot 2 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
One Lot Close Per Minute beginning on  Thursday, April 14th 2016 at 10:00 AM Central / 11:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1 Ryobi Mdl. BS904, 9" Vertical Table Top Band Saw, S/N-EM1238-03723
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 1

Description: Ryobi Mdl. BS904, 9" Vertical Table Top Band Saw, S/N-EM1238-03723

Category:

2 Jet Mdl. JBG-8A, 8" Bench Grinder W/Pedestal Base
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 2

Description: Jet Mdl. JBG-8A, 8" Bench Grinder W/Pedestal Base

Category:

3 Jet Mdl. JBG-8A, 8" Bench Grinder W/Pedestal Base
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 3

Description: Jet Mdl. JBG-8A, 8" Bench Grinder W/Pedestal Base

Category:

4 Quantity Of Ridgid, Milwaukee & Ryobi Cordless Drills
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 4

Description: Quantity Of Ridgid, Milwaukee & Ryobi Cordless Drills

Category:

5 Exair Mdl. 6198 Pneumatic Chip Trapper, Suction And Discharge Pumping System
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 5

Description: Exair Mdl. 6198 Pneumatic Chip Trapper, Suction And Discharge Pumping System

Category:

6 Parker Mdl. 10MF40SA10C1X833006, 50-PSI, Portable Filtration Pumping System, S/N-W
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 6

Description: Parker Mdl. 10MF40SA10C1X833006, 50-PSI, Portable Filtration Pumping System, S/N-W

Category:

7 Roughneck Portable 30-Gallon HD Fuel Caddy
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 7

Description: Roughneck Portable 30-Gallon HD Fuel Caddy

Category:

8 55-Gallon Barrel Cart & (3) Barrel Pumps
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 8

Description: 55-Gallon Barrel Cart & (3) Barrel Pumps

Category:

9 Lot of (2) Eagle / IBC Secondary Fluid Containment Units & (1) Single Barrel Secondary Containment Unit
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 9

Description: Lot of (2) Eagle / IBC Secondary Fluid Containment Units & (1) Single Barrel Secondary Containment Unit

Category:

10 IDT Mdl. 850 Cool Blaster Mist Control Unit
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 10

Description: IDT Mdl. 850 Cool Blaster Mist Control Unit

Category:

12 3-Step Portable Stock Ladder
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 12

Description: 3-Step Portable Stock Ladder

Category:

13 Louisville Mdl. FE3228, 28' Fiberglass Extension Ladder
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 13

Description: Louisville Mdl. FE3228, 28' Fiberglass Extension Ladder

Category:

14 Werner 10' Fiberglass Ladder
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 14

Description: Werner 10' Fiberglass Ladder

Category:

18 (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,367-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001778
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 18

Description: (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,367-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001778

Category:

19 Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-712029, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0044
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 19

Description: Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-712029, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0044

Category:

20 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 20

Description: Lot of (30) Cat-40 Tool Holders

Category:

21 (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 1,965-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001777
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 21

Description: (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 1,965-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001777

Category:

23 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 23

Description: Lot of (30) Cat-40 Tool Holders

Category:

24 (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,594-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001772
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 24

Description: (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,594-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001772

Category:

25 Lot of (4) Kurt 6" Precision Machine Vises (Located In Lot #24)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 25

Description: Lot of (4) Kurt 6" Precision Machine Vises (Located In Lot #24)

Category:

26 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 26

Description: Lot of (30) Cat-40 Tool Holders

Category:

27 (2011) Hyundai-Wia, Mdl F500, CNC Vertical Machining Center, 2,786-Hours, Table Size 19-1/2" x 47" W/ Hyundai-Wia Fanuc I Series CNC Control, Jorgensen Chip Conveyor, S/N, 24-Position Automatic Tool Changer, And Hi-Techs Model AMOC-900FT Oil Cooling Unit, S/N-G3684-2496
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 27

Description: (2011) Hyundai-Wia, Mdl F500, CNC Vertical Machining Center, 2,786-Hours, Table Size 19-1/2" x 47" W/ Hyundai-Wia Fanuc I Series CNC Control, Jorgensen Chip Conveyor, S/N, 24-Position Automatic Tool Changer, And Hi-Techs Model AMOC-900FT Oil Cooling Unit, S/N-G3684-2496

Category:

28 Nikken Mdl CNC302-FA-M, 4th Axis, 11" CNC Rotary Table, S/N-7654 W/Nikken Mdl. TAT-250, 11" Rotary Table, S/N-2797 & 32"X4", 6-Sided Tombstone
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 28

Description: Nikken Mdl CNC302-FA-M, 4th Axis, 11" CNC Rotary Table, S/N-7654 W/Nikken Mdl. TAT-250, 11" Rotary Table, S/N-2797 & 32"X4", 6-Sided Tombstone

Category:

29 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 29

Description: Lot of (30) Cat-40 Tool Holders

Category:

30 (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,527-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001739
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 30

Description: (2013) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,527-Hours, Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001739

Category:

31 Lot of (4) Kurt 6" Precision Machine Vises (Located In Lot #30)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 31

Description: Lot of (4) Kurt 6" Precision Machine Vises (Located In Lot #30)

Category:

32 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 32

Description: Lot of (30) Cat-40 Tool Holders

Category:

33 (2013) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 860-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5, W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Model 57508256 Chip Conveyor, S/N-MVv0055-000165
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 33

Description: (2013) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 860-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5, W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Model 57508256 Chip Conveyor, S/N-MVv0055-000165

Category:

34 (2012) Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-712001, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0051 (Never Used)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 34

Description: (2012) Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-712001, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0051 (Never Used)

Category:

35 (2012) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,396-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001394
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 35

Description: (2012) Doosan Mdl. DNM500, CNC Vertical Machining Center, 2,396-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001394

Category:

36 (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712002, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0041 (Never Used)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 36

Description: (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712002, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0041 (Never Used)

Category:

37 Lot of (30) Cat-40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 37

Description: Lot of (30) Cat-40 Tool Holders

Category:

37A Lot of (49) CAT - 40 Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 37A

Description: Lot of (49) CAT - 40 Tool Holders

Category:

38 (2010) Quaser Mdl. MV184E, CNC Machining Center, 706-Hours, Table Size 1,200mm x 600mm, Travels X 1020mm/ Y610mm / Z 610 mm, Fanuc Model Series 0i-MD CNC Control; 30-Position Automatic Tool Changer, And Chip Conveyor, Habor Model HBO-V10CPTSBM2 Oil Cooler, R407C Refrigerant, 10,000 RPM, S/N-118F100162, Quaser Mdl. MV184E
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 38

Description: (2010) Quaser Mdl. MV184E, CNC Machining Center, 706-Hours, Table Size 1,200mm x 600mm, Travels X 1020mm/ Y610mm / Z 610 mm, Fanuc Model Series 0i-MD CNC Control; 30-Position Automatic Tool Changer, And Chip Conveyor, Habor Model HBO-V10CPTSBM2 Oil Cooler, R407C Refrigerant, 10,000 RPM, S/N-118F100162, Quaser Mdl. MV184E

Category:

39 (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712005, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0045 (Never Used)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 39

Description: (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712005, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0045 (Never Used)

Category:

43 (2012) Doosan Mdl. DNM500, CNC Vertical Machining Center, 601-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001393
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 43

Description: (2012) Doosan Mdl. DNM500, CNC Vertical Machining Center, 601-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001393

Category:

44 (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712021, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0050
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 44

Description: (2012) Yuasa Mdl. DMNC-28001, 4th Axis, 11", CNC Rotary Table, S/N-712021, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0050

Category:

45 (2013) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 3,465-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5 W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Model 57508256 Chip Conveyor, S/N-MV0055-000173
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 45

Description: (2013) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 3,465-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5 W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Model 57508256 Chip Conveyor, S/N-MV0055-000173

Category:

46 (2010) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 495-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5 W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Chip Conveyor, S/N-DT360Dd0028
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 46

Description: (2010) Doosan Mdl. DT360D/40, CNC Vertical Machining Center, 495-Hours, Travel (X/Y/Z) mm 520/360/320, 40 Taper Tooling, Table Size 650 X 375 (2EA), Max Spindle Speed (R/Min) 12,000, Max Spindle Power (KW) 7.5 W/ Doosan-Fanuc Model I Series CNC Control, 14-Position Automatic Tool Changer, 2-Pallet Position, And LNS Chip Conveyor, S/N-DT360Dd0028

Category:

47 (2009) Quaser Mdl. MV154P-15C, CNC Vertical Machining Center, 406-Hours, Table Size 900mm x 500mm, Travels X- 762/ Y -530 mm / Z -560 mm, Fanuc Model Series 18i-MB CNC Control, Automatic Tool Changer, Habor Model HBO-V2RPTSBM5 Oil Cooler, R407C Refrigerant, 10,000RPM S/N-103G091097
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 47

Description: (2009) Quaser Mdl. MV154P-15C, CNC Vertical Machining Center, 406-Hours, Table Size 900mm x 500mm, Travels X- 762/ Y -530 mm / Z -560 mm, Fanuc Model Series 18i-MB CNC Control, Automatic Tool Changer, Habor Model HBO-V2RPTSBM5 Oil Cooler, R407C Refrigerant, 10,000RPM S/N-103G091097

Category:

48 (2011) Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-711011, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0042
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 48

Description: (2011) Yuasa Mdl. DMNC-28001, 4th Axis 11", CNC Rotary Table, S/N-711011, W/ Yuasa Mdl. DAS280, 11" Rotary Table, S/N-DA0042

Category:

49 Lot of (30) (New) Cat40XER16M-6", Collet Chucks/Tool Holders (M-Type)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 49

Description: Lot of (30) (New) Cat40XER16M-6", Collet Chucks/Tool Holders (M-Type)

Category:

50 (2011) Hyundai-Wia, Mdl F500, CNC Vertical Machining Center, 2,995-Hours, Table Size 19-1/2" x 47" , W/ Hyundai-Wia Fanuc I Series CNC Control, Jorgensen Chip Conveyor, 24-Position Automatic Tool Changer, And Hi-Techs Model AMOC-900FT Oil Cooling Unit, S/N-G3684-2497
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 50

Description: (2011) Hyundai-Wia, Mdl F500, CNC Vertical Machining Center, 2,995-Hours, Table Size 19-1/2" x 47" , W/ Hyundai-Wia Fanuc I Series CNC Control, Jorgensen Chip Conveyor, 24-Position Automatic Tool Changer, And Hi-Techs Model AMOC-900FT Oil Cooling Unit, S/N-G3684-2497

Category:

51 (2011) Doosan Mdl. DNM500, CNC Vertical Machining Center, 860-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001134
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 51

Description: (2011) Doosan Mdl. DNM500, CNC Vertical Machining Center, 860-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001134

Category:

52 Yuasa 4th Axis 6-3/4", Dual Head CNC Rotary Table W/ (2) Tail Stocks
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 52

Description: Yuasa 4th Axis 6-3/4", Dual Head CNC Rotary Table W/ (2) Tail Stocks

Category:

53 Yuasa 4th Axis 6-3/4", Dual Head CNC Rotary Table (Machine For Parts Only)
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 53

Description: Yuasa 4th Axis 6-3/4", Dual Head CNC Rotary Table (Machine For Parts Only)

Category:

54 (2011) Doosan Mdl. DNM500, CNC Vertical Machining Center, 1,404-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001145
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 54

Description: (2011) Doosan Mdl. DNM500, CNC Vertical Machining Center, 1,404-Hours Travel (X/Y/Z) mm 1020/540/510, Max Spindle Speed (R/min) 12,000, Table Size mm 1200 X 540, CAT 40 Taper Tooling, W/ Doosan-Fanuc Model I Series CNC Control, 30-Position Automatic Tool Changer, Kaukan Model 4PTS Cooling Unit, And LNS Model Turbo HB Chip Conveyor, S/N-MV0010-001145

Category:

55 (2012) Doosan Mdl. VC430, CNC Vertical Machining Center, 1,136-Hours, Travel (X/Y/Z) mm 560/430/570, 40 Tooling Taper, Table Size mm 712 X 490 (2EA), Max Spindle Speed 10,000, Max Spindle Motor Power 18.5 KW, Doosan-Fanuc Model I Series CNC Control, 40-Position Automatic Tool Changer, (2) Pallet Stations, And Henning Model VC430 Chip Conveyor, S/N-MV0039-000432
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 55

Description: (2012) Doosan Mdl. VC430, CNC Vertical Machining Center, 1,136-Hours, Travel (X/Y/Z) mm 560/430/570, 40 Tooling Taper, Table Size mm 712 X 490 (2EA), Max Spindle Speed 10,000, Max Spindle Motor Power 18.5 KW, Doosan-Fanuc Model I Series CNC Control, 40-Position Automatic Tool Changer, (2) Pallet Stations, And Henning Model VC430 Chip Conveyor, S/N-MV0039-000432

Category:

56 Lot of (30) (New) Cat 40XER32-4", Collet Chuck/Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 56

Description: Lot of (30) (New) Cat 40XER32-4", Collet Chuck/Tool Holders

Category:

57 Lot of (10) CV40-ERM-130 & (4) CV40-ER32-100 Collet Chucks / Tool Holders
Sold at State of the Art CNC Machining Facility on 4/14/2016
Cedarburg, WI

Lot Number: 57

Description: Lot of (10) CV40-ERM-130 & (4) CV40-ER32-100 Collet Chucks / Tool Holders

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577